PXR-Q2MSL
- Conforms to ISO 14443A, supporting MIFARE card.
- Unique ID or Block read format supported and programmable key value.
- Supports 7 bytes serial card number.
- Provides RS-485 communication interface for long distance installation.
- Supports to scan a QR Code from your smart phone or paper.
- Support QR Code scanning function to replace RFID cards sensing
- Provides 500 valid card numbers (32 cards are reserved that can be
Features
- Conforms to ISO 14443A, supporting MIFARE card.
- Unique ID or Block read format supported and programmable key value.
- Supports 7 bytes serial card number.
- Provides RS-485 communication interface for long distance installation.
- Supports to scan a QR Code from your smart phone or paper.
- Support QR Code scanning function to replace RFID cards sensing
- Provides 500 valid card numbers (32 cards are reserved that can be downloaded from AP to the reader) work as standalone operation mode while the emergency.
- Auto-learning function. The valid card ID can be added or deleted through the AP.
- Reader mode : a standard operation mode while connects with control panel; Control panels poll readers through communication protocol.
- Standalone mode : Automatically turning into standalone mode after disconnecting from the control panel for 10 seconds (settable 1~255 seconds).
- Equipped with DIP-SW, able to set NODE ID, which can be connected to max. of 30 readers.
- Provides inputs for door sensor, case sensor and exit button.
- Door ajar alarm, settable the alerting sound made from reader buzzer or external alarm.
- Reader's LED & Buzzer control can be set by upstream control panel.
- Wide range of operating temperature to meet the requirements of tropical or frigid zone climate environment.
- Case sensor detection function to enhance the system security.
- Watchdog function secures system free from halting.
Specification
|
Model No. |
PXR-Q2MSL |
|
Read Format |
Mifare (13.56 MHz ) |
|
Read Range |
3 cm |
|
QR Code Scan |
Auto scan : Get close to scan automatically |
|
Comm. Interface |
RS-485 |
|
Input Port |
Case Sensor x 1, Door Sensor x 1, Exit Sensor x 1 |
|
Output Port |
Relay x 1, O.C. Output x 2 (Alarm, external ACU-30) |
|
ID Setting |
6 Digit DIP-SW |
|
Comm. Baudrate |
19,200 bps-N-8-1 |
|
LED Indicator |
Red/Green Bi-color LED x 1 (Status/Power) |
|
Beep Tone |
Buzzer |
|
Power Input |
DC 12V |
|
Current Consumption |
300mA (max) |
|
Operating Temp. |
-20°C~ 70°C / -4°F~ 158°F |
|
Relative Humidity |
20% ~ 80%(Non-condensing) |
|
Dimensions (mm) |
Faceplate：120(L) x 75(W) x 14(H) |
Related Products
Downloads
Type
Name
Format
Downloads
